HeatOnn Alloys

Ferritic Stainless Steel

Ferritic Stainless Steel
Sheets • Coils • Plates • Pipes • Rods

Ferritic stainless steels are iron-chromium alloys known for their excellent corrosion resistance, magnetic properties, and good ductility. They contain low carbon and do not undergo heat treatment for hardening, making them ideal for automotive, industrial, and architectural applications.

Key Features

Excellent resistance to corrosion and oxidation
Magnetic in all conditions
Good ductility and formability
Resistant to stress corrosion cracking
Low carbon content prevents sensitization
Cost-effective alternative to austenitic grades
Good performance in elevated temperature environments

Applications

Automotive exhaust systems and components
Industrial furnaces and heat exchangers
Architectural cladding and structural elements
Household appliances (washers, dryers, ovens)
Food processing equipment
Water heaters, boilers, and pressure vessels
Chemical and petrochemical processing equipment

Need Assistance?

Contact our team for more information @ +91-88808 08883 / +91-99017 48615

Request a Quote

Key Features

Good corrosion resistance, especially in mildly corrosive environments
Excellent resistance to high-temperature oxidation
Superior weldability and formability
Economical stainless steel option compared to austenitic grades
Titanium stabilization minimizes grain growth during welding
Good thermal conductivity and low thermal expansion

Chemical Composition (% by weight)

Element	Composition (%)
Carbon (C)	≤ 0.03
Chromium (Cr)	10.5 – 11.75
Nickel (Ni)	≤ 0.50
Manganese (Mn)	≤ 1.00
Silicon (Si)	≤ 1.00
Sulfur (S)	≤ 0.03
Phosphorus (P)	≤ 0.04
Titanium (Ti)	≥ Stabilized (Typically 6×C min)
Iron (Fe)	Balance

Mechanical Properties

Property	Value
Tensile Strength	380 – 450 MPa
Yield Strength (0.2% Proof)	170 – 240 MPa
Elongation	20% min
Hardness	≤ 170 HB

Physical Properties

Property	Value
Density	7.75 g/cm³
Melting Range	1480 – 1530°C
Thermal Conductivity	24.9 W/m·K
Electrical Resistivity	0.60 µΩ·m
Modulus of Elasticity	200 GPa

Standard Sizes

Sheets & Plates

Thickness Range	Width	Length
0.5 mm – 50 mm	1000 / 1250 / 1500 mm	2000 – 6000 mm

Coils

Thickness	Width
0.5 mm – 6 mm	600 – 1500 mm

Pipes

Type	Size Range
Seamless	1/2" – 8"
Welded	1/2" – 24"

Rods

Shape	Diameter / Size
Round	6 mm – 150 mm
Square / Hex	10 mm – 100 mm

Applications

Automotive exhaust systems
Mufflers and catalytic converters
Heat exchangers and furnace components
Industrial ducting and piping
Oil & gas and refinery equipment
Food processing equipment (non-critical)
General structural and architectural uses

Key Features

High tensile strength and good resistance to wear.
Moderate corrosion resistance in mild environments.
Excellent machinability and heat-treatable.
Good oxidation resistance at elevated temperatures.
Magnetic in all conditions.
High hardness after heat treatment.

Chemical Composition (% by weight)

Element	Percentage (%)
Carbon (C)	0.08 – 0.15
Chromium (Cr)	11.5 – 13.5
Manganese (Mn)	≤ 1.0
Silicon (Si)	≤ 1.0
Phosphorus (P)	≤ 0.04
Sulfur (S)	≤ 0.03
Nickel (Ni)	≤ 0.75

Mechanical Properties

Property	Value
Tensile Strength	450 – 600 MPa
Yield Strength	205 – 300 MPa
Elongation	20% (min)
Hardness (HB)	170 – 220 HB

Physical Properties

Property	Value
Density	7.75 g/cm³
Melting Range	1480 – 1530°C
Thermal Conductivity	24 W/m·K
Electrical Resistivity	0.60 μΩ·m
Modulus of Elasticity	200 GPa

Standard Sizes

Sheets & Plates

Thickness	Width	Length
0.5 mm – 50 mm	1000 / 1250 / 1500 mm	2000 – 6000 mm

Coils

Thickness	Width
0.3 mm – 6 mm	600 – 1500 mm

Pipes

Type	Size Range
Seamless / Welded	½" – 12" (NB)

Rods

Form	Diameter Range
Round / Square / Hex	6 mm – 200 mm

Applications

Cutlery and kitchen equipment
Valve components and fasteners
Pump shafts and spindles
Automotive exhaust systems
Petrochemical processing equipment
Steam and gas turbine components
Industrial machinery requiring high hardness

Key Features

Excellent corrosion resistance in mildly corrosive environments
Good resistance to oxidation and high temperatures
Magnetic stainless steel with good formability
Low thermal expansion compared to austenitic grades
Economical alternative to Grade 304 in non-severe conditions
Suitable for polishing and decorative finishes

Chemical Composition (% by weight)

Element	Percentage (%)
Chromium (Cr)	16.0 – 18.0
Carbon (C)	≤ 0.12
Manganese (Mn)	≤ 1.00
Silicon (Si)	≤ 1.00
Phosphorus (P)	≤ 0.040
Sulfur (S)	≤ 0.030
Nickel (Ni)	≤ 0.50
Iron (Fe)	Balance

Mechanical Properties

Property	Value
Tensile Strength	≥ 450 MPa
Yield Strength	≥ 205 MPa
Elongation	≥ 22%
Hardness (HRB)	≤ 85

Physical Properties

Property	Value
Density	7.70 g/cm³
Melting Range	1425 – 1510°C
Thermal Conductivity	26 W/m·K
Electrical Resistivity	0.60 μΩ·m
Modulus of Elasticity	200 GPa

Standard Sizes

Sheets & Plates

Thickness (mm)	Width (mm)	Length (mm)
0.4 – 20	1000 / 1219 / 1500	2000 – 6000

Coils

Thickness (mm)	Width (mm)
0.25 – 3.0	600 – 1500

Pipes & Tubes

Outside Diameter	Wall Thickness
6 mm – 219 mm	1 mm – 6 mm

Rods

Diameter	Form
5 mm – 120 mm	Round / Square / Hexagonal

Applications

Automotive trims, exhaust systems, and heat shields
Kitchens, food processing equipment, and appliances
Architectural and interior decorative panels
Dishwashers, refrigerator linings, and washing machine drums
Fuel tanks and fasteners
Heat exchangers and industrial components

Key Features

Improved machinability due to sulfur addition.
Good corrosion resistance in mildly corrosive environments.
Magnetic ferritic stainless steel grade.
Excellent formability and good ductility.
Better wear resistance compared to standard 430 grade.
Suitable for high-production machining operations.

Chemical Composition (% by weight)

Element	Percentage (%)
Carbon (C)	≤ 0.12
Chromium (Cr)	16.0 – 18.0
Manganese (Mn)	≤ 1.00
Silicon (Si)	≤ 1.00
Phosphorus (P)	≤ 0.040
Sulfur (S)	0.15 – 0.35
Nickel (Ni)	≤ 0.60
Iron (Fe)	Balance

Mechanical Properties

Property	Value
Tensile Strength	~ 450 MPa
Yield Strength	~ 280 MPa
Elongation	20% (min)
Hardness	HB 170 – 200

Physical Properties

Property	Value
Density	7.7 g/cm³
Melting Range	1425 – 1510°C
Thermal Conductivity	23 W/m·K (at 100°C)
Electrical Resistivity	0.60 μΩ·m
Modulus of Elasticity	200 GPa

Standard Sizes

Sheets & Plates

Thickness (mm)	Width (mm)	Length (mm)
0.5 mm – 50 mm	1000 / 1250 / 1500 mm	2000 / 2500 / 3000 mm

Coils

Thickness (mm)	Width (mm)
0.3 mm – 3 mm	1000 / 1250 mm

Pipes & Tubes

Outside Diameter	Schedule
6 mm – 600 mm	SCH 5 to SCH 80

Rods

Diameter	Shapes
5 mm – 200 mm	Round / Square / Hexagonal

Applications

High-speed automatic machining components
Fasteners, bolts, and screws
Valve components and pump shafts
Automotive parts and trim
Industrial equipment components
Electrical appliances
Food processing equipment (non-critical areas)

Ferritic Stainless Steel

Our Products

Ferritic Stainless Steel
Sheets • Coils • Plates • Pipes • Rods

Key Features

Applications

Ferritic Stainless Steel Grades

Need Assistance?

Contact our team for more information @ +91-88808 08883 / +91-99017 48615

Ferritic Stainless Steel

Our Products

Ferritic Stainless SteelSheets • Coils • Plates • Pipes • Rods

Key Features

Applications

Ferritic Stainless Steel Grades

Need Assistance?

Contact our team for more information @ +91-88808 08883 / +91-99017 48615

Ferritic Stainless Steel
Sheets • Coils • Plates • Pipes • Rods